Callsun 200W N-Type Bifacial Solar Panel — Anti-Shading, 25% Efficient
- Local delivery & installation in California
- Licensed electricians available
- Questions? Real answers from our team
- 14-day returns
Why this product
The Callsun 200W is a rigid, glass-on-glass bifacial panel with N-Type cells: it collects light on both faces, so a ground mount over light-colored gravel or concrete picks up extra power from reflected light. It is a sensible size for portable power stations: light enough to carry at about 24 lb, and two of them in series land comfortably inside a 60V solar input.
Key specs
- Power: 200W (STC), 25% cell efficiency
- Voltage: Vmp 23.74V, Voc 27.31V
- Current: Imp 8.43A, Isc 8.91A
- Cells: N-Type 16BB, bifacial, anti-shading layout
- Size and weight: 51.34 × 30.31 × 1.58 in, about 23.8 lb
- Build: 3.2mm tempered glass, anodized aluminum frame, IP68
- Warranty: 84.5% output commitment at 25 years
Using it with a power station
Two 200W panels in series produce about 54.6V open-circuit, which fits the 60V solar input found on most EcoFlow DELTA and BLUETTI stations. For more power, wire additional pairs in parallel (for example, three series pairs in parallel for 1,200W). Three panels in series reach about 82V, which is too high for a 60V input. Open-circuit voltage rises in freezing weather, so in very cold conditions check the voltage before connecting.
Match the panels to your station's solar input before you buy: add up the open-circuit voltage (Voc) of panels wired in series and keep it under the station's maximum input voltage, and check the station's input current limit. Many stations need an MC4 adapter cable to connect rigid panels. Not sure what fits? Ask us and we'll match panels to your station, or browse our portable power stations.
Using it with the EZ1-LV microinverter
For plug-in solar, wire two 200W panels in series on each of the EZ1-LV's two inputs: four panels (800W) per microinverter. Always pair them, because a single 200W panel runs at about 24V, below the EZ1-LV's 26V minimum operating voltage.
Local delivery & install
We deliver and install across our California service area.
Licensed electricians
Meter installs, dedicated circuits and breakers. Learn more
Know your savings
Estimate your bill savings with our savings calculator.
We'll help you plan it
Tell us about your space and your power bill, and we'll recommend the right kit, panels and backup setup for your home.