{"title":"Cables \u0026 Accessories","description":"\u003cp\u003eParallel bus cables, extension leads and monitoring add-ons for \u003ca href=\"\/collections\/plug-in-solar-kits\"\u003eAPsystems EZ1 plug-in solar systems\u003c\/a\u003e: the small parts that decide whether an install finishes in an afternoon or waits a week on a delivery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a cable length:\u003c\/strong\u003e measure the path the cable will really take rather than the straight-line gap. Runs bend around rails and corners, and every connector wants a little slack. If you're between two lengths, take the longer one. Length guidance is on each product page.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChaining inverters?\u003c\/strong\u003e The \u003ca href=\"\/products\/apsystems-ez1-dual-parallel-bus-cable-2m\"\u003eEZ1 parallel bus cable\u003c\/a\u003e joins units onto one connection, but how many you can run is set by the circuit, not the cable. See \u003ca href=\"\/pages\/book-an-electrician\"\u003ewhen you need a dedicated circuit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eNo Wi-Fi at the array? The \u003ca href=\"\/products\/apsystems-lte-usb-dongle\"\u003eLTE USB Dongle\u003c\/a\u003e gives your monitoring its own cellular connection.\u003c\/p\u003e","products":[{"product_id":"apsystems-lte-usb-dongle","title":"APsystems LTE USB Dongle","description":"\u003cp\u003eA cellular connection for sites where Wi-Fi was never going to work. The LTE USB dongle gives your APsystems monitoring hardware its own independent path to the internet, over the mobile network, with no dependence on the building's router, password or uptime.\u003c\/p\u003e\n\n\u003ch3\u003eThe problem it solves\u003c\/h3\u003e\n\u003cp\u003eMonitoring assumes an internet connection, and a surprising number of solar sites do not have a usable one. Detached garages and barns sit well outside router range. New-build sites have an array commissioned months before broadband is installed. Rental properties have a network the installer has no business asking for credentials to. Remote ground mounts, pump stations and agricultural buildings often have no fixed line at all.\u003c\/p\u003e\n\n\u003ch3\u003eWhy it is not just a convenience\u003c\/h3\u003e\n\u003cp\u003eA monitoring gateway that cannot reach the internet is an expensive local logger. The warranty claim you file two years from now depends on production history that was actually uploaded. So does the service call where you prove a module has been underperforming since installation. Connectivity is not a nice-to-have on the data side — it is the thing that makes the data exist.\u003c\/p\u003e\n\n\u003ch3\u003eAlso useful when\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe homeowner changes their Wi-Fi password and the system silently drops offline\u003c\/li\u003e\n  \u003cli\u003eYou are managing systems under an O\u0026amp;M contract and want a connection you control\u003c\/li\u003e\n  \u003cli\u003eThe array is commissioned before the property is occupied\u003c\/li\u003e\n  \u003cli\u003eSite wireless is congested or unreliable enough to cause data gaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eCheck LTE coverage at the equipment location, not at the street — equipment rooms, basements and metal outbuildings attenuate signal significantly. Confirm data plan requirements and carrier compatibility for your region, as these are not universal. Verify compatibility with your specific ECU model before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eRelated products\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"\/products\/apsystems-ez1-lv-plug-in-solar-kit-microinverter-apmeter-zero-export\"\u003eAPsystems EZ1-LV Plug-In Solar Kit + APmeter\u003c\/a\u003e — the complete zero-export plug-in system\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/products\/apsystems-ez1-lv-add-on-microinverter-expansion-unit-apmeter-required\"\u003eEZ1-LV Add-On Microinverter\u003c\/a\u003e — expand an existing kit\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cables-accessories\"\u003eAll cables \u0026amp; accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APsystems","offers":[{"title":"Default Title","offer_id":43465671082032,"sku":"APS-LTE-DONGLE","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/Dongle.png?v=1786088390"},{"product_id":"apsystems-ez1-dual-parallel-bus-cable-2m","title":"APsystems EZ1 Dual Parallel Bus Cable — 2m","description":"\u003cp\u003eThe 2-metre parallel bus cable for chaining EZ1 microinverters onto a single AC circuit. If you are running more than one EZ1 on a balcony, patio or small ground mount, this is what links them without running a separate cord back to a separate outlet for each unit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eEach EZ1 arrives with an AC cable terminating in a plug. Two inverters means two plugs and two outlets — quickly impractical on a balcony with one receptacle. The bus cable joins units in parallel so the group presents a single connection to the supply, which is both tidier and closer to how the system is meant to be wired.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing 2m over 4m\u003c\/h3\u003e\n\u003cp\u003eTwo metres suits units mounted close together — a pair of inverters behind adjacent modules on the same rail, or a compact two-by-two array on a single frame. If your inverters sit at opposite ends of a longer run, or the modules are spread across a wider balcony, take the \u003ca href=\"\/products\/apsystems-ez1-dual-parallel-bus-cable-4m\"\u003e4-metre version\u003c\/a\u003e instead. Cable that is slightly too short is a problem you cannot solve on install day; cable that is slightly too long is just a neat coil.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eMeasure the actual routed path, not the straight line — cable follows the frame, goes around corners and needs a service loop at each connector. Also check the total load on the branch circuit before chaining multiple inverters onto one supply; the number of EZ1 units you can parallel is limited by that circuit, not by the cable. Our \u003ca href=\"\/pages\/book-an-electrician\"\u003eguide to dedicated circuits\u003c\/a\u003e explains why two microinverters usually need their own circuit.\u003c\/p\u003e\n\u003cp\u003eFits every EZ1-series microinverter: the unit inside our \u003ca href=\"\/products\/apsystems-ez1-lv-plug-in-solar-kit-microinverter-apmeter-zero-export\"\u003eEZ1-LV Plug-In Solar Kit\u003c\/a\u003e as well as each \u003ca href=\"\/products\/apsystems-ez1-lv-add-on-microinverter-expansion-unit-apmeter-required\"\u003eEZ1-LV Add-On\u003c\/a\u003e you connect to it.\u003c\/p\u003e","brand":"APsystems","offers":[{"title":"Default Title","offer_id":43465671934000,"sku":"APS-EZ1-BUS-2M","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/APsystems-EZ1-bus-cable_2m.jpg?v=1786088498"},{"product_id":"apsystems-ez1-dual-parallel-bus-cable-4m","title":"APsystems EZ1 Dual Parallel Bus Cable — 4m","description":"\u003cp\u003eThe 4-metre parallel bus cable for EZ1 microinverters — the longer of the two options, for arrays where the units are not sitting side by side.\u003c\/p\u003e\n\n\u003ch3\u003eWhen the extra length earns its place\u003c\/h3\u003e\n\u003cp\u003eFour metres covers the layouts that two will not: modules split across a wide balcony, an L-shaped railing, a pair of frames either side of a doorway, or a small ground mount where the rows are separated by a walkway. It also covers the common case where the inverters end up further apart than the drawing suggested, because the mounting points that actually existed were not where you hoped.\u003c\/p\u003e\n\n\u003ch3\u003eThe general rule on cable length\u003c\/h3\u003e\n\u003cp\u003eBuy the length you need plus a service loop, and do not buy a run so long that you are managing a coil of surplus. Excess cable on an outdoor array is not free — it needs securing, it collects water in the loop, and it gives wind something to work at over the years. That said, if you are genuinely between the two lengths, take the longer one. A short cable is a failed installation; a long one is ten minutes with cable ties.\u003c\/p\u003e\n\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eMeasure the routed path around the frame rather than the direct distance, and add slack at each connector. Check the branch circuit rating too — how many EZ1 units you can parallel is set by the circuit feeding them, not by the cable joining them. See \u003ca href=\"\/pages\/book-an-electrician\"\u003ewhen you need a dedicated circuit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCompatible with EZ1-series microinverters, including the \u003ca href=\"\/products\/apsystems-ez1-lv-plug-in-solar-kit-microinverter-apmeter-zero-export\"\u003eEZ1-LV Plug-In Solar Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/apsystems-ez1-lv-add-on-microinverter-expansion-unit-apmeter-required\"\u003eEZ1-LV Add-On Microinverter\u003c\/a\u003e. Also available in \u003ca href=\"\/products\/apsystems-ez1-dual-parallel-bus-cable-2m\"\u003e2m\u003c\/a\u003e.\u003c\/p\u003e","brand":"APsystems","offers":[{"title":"Default Title","offer_id":43465672130608,"sku":"APS-EZ1-BUS-4M","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/APsystems-EZ1-bus-cable_4m.jpg?v=1786088529"},{"product_id":"dc-extension-cable-mc4-1m","title":"DC Extension Cable MC4 — 1m","description":"\u003cp\u003eA one-metre MC4 extension lead — the shortest in the range, and the one you want when the factory leads \u003cem\u003ealmost\u003c\/em\u003e reach.\u003c\/p\u003e\n\n\u003ch3\u003eThe gap this closes\u003c\/h3\u003e\n\u003cp\u003eModule junction box leads are cut to a standard length that assumes the inverter sits directly behind the panel. Real mounting rarely cooperates. The inverter ends up one rail over to clear a bracket, or the module is portrait when the leads were sized for landscape, and suddenly you are 40cm short. A metre solves that without leaving a metre and a half of surplus to dress.\u003c\/p\u003e\n\n\u003ch3\u003eWhy not just buy long and coil the rest\u003c\/h3\u003e\n\u003cp\u003eExcess DC cable on a solar array is not harmless. Coiled conductors carrying DC form an inductive loop, loose loops flap in wind and fatigue their terminations over years, and slack that dips below the frame collects standing water at the low point. Sizing close to the actual run is better practice than buying one long length for everything.\u003c\/p\u003e\n\n\u003ch3\u003ePractical notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMC4 connectors are polarised — one lead extends positive, one negative\u003c\/li\u003e\n  \u003cli\u003eEvery extension adds two more connections, and connections are the usual suspects in DC fault-finding. Seat them properly and confirm the click\u003c\/li\u003e\n  \u003cli\u003eSupport the cable on the frame rather than letting it hang on the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in 2m, 3m and 4m. Confirm connector compatibility — MC4-style connectors from different manufacturers are not always cross-matable, and mixing brands is a known failure mode.\u003c\/p\u003e","brand":"APsystems","offers":[{"title":"Default Title","offer_id":43465672523824,"sku":"APS-DCEXT-1M","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/DC_Extension_Cable.jpg?v=1786088567"},{"product_id":"dc-extension-cable-mc4-2m","title":"DC Extension Cable MC4 — 2m","description":"\u003cp\u003eTwo metres of MC4 extension — the length most installers reach for first, and the one worth keeping spare in the van.\u003c\/p\u003e\n\n\u003ch3\u003eWhere two metres lands\u003c\/h3\u003e\n\u003cp\u003eThis is the span that covers a module mounted one position away from its inverter. On a dual-input microinverter feeding two panels, the second module is frequently a full panel-width from the unit, and two metres routes that comfortably with slack for a service loop at each end. It is the default answer on ground mounts, where inverters mount to the torque tube and modules sit above and across.\u003c\/p\u003e\n\n\u003ch3\u003eOn buying spares\u003c\/h3\u003e\n\u003cp\u003eCable length is the single most common thing to get wrong on a site survey, because nobody measures the routed path — they measure the gap. The path goes around the frame, under the rail, along the tube and back up, and it is reliably longer than the drawing implied. Carrying a couple of two-metre leads turns a return visit into a five-minute fix.\u003c\/p\u003e\n\n\u003ch3\u003ePractical notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRoute along structural members and secure with UV-rated ties; do not let cable bear on the module frame edge\u003c\/li\u003e\n  \u003cli\u003eKeep positive and negative runs together rather than separated — large loop areas between conductors invite induced voltage during nearby lightning\u003c\/li\u003e\n  \u003cli\u003eLeave a drip loop so water runs away from the connector, not into it\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in 1m, 3m and 4m. Verify connector compatibility before mixing with existing array cabling.\u003c\/p\u003e","brand":"APsystems","offers":[{"title":"Default Title","offer_id":43465673900080,"sku":"APS-DCEXT-2M","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/DC_Extension_Cable_b8c784c9-8c7c-4885-a7f3-5ee356f03cc9.jpg?v=1786088607"},{"product_id":"dc-extension-cable-mc4-3m","title":"DC Extension Cable MC4 — 3m","description":"\u003cp\u003eThree metres of MC4 extension, for the runs that cross something — a walkway between ground-mount rows, a roof obstruction, a gap where a module could not be placed.\u003c\/p\u003e\n\n\u003ch3\u003eWhat three metres is really for\u003c\/h3\u003e\n\u003cp\u003eOnce you are past two metres you are usually not extending to the next module; you are getting around an obstacle. A plumbing vent that forced a panel two positions over. A ground-mount row split by a service path. A roof plane change where the inverter had to stay on the accessible side. These are the runs that were not on the layout drawing and only became apparent once the racking was up.\u003c\/p\u003e\n\n\u003ch3\u003eVoltage drop, briefly\u003c\/h3\u003e\n\u003cp\u003eAt the currents a single PV module produces over three metres of properly sized PV wire, voltage drop is negligible — this is not a length where you need to start calculating. The thing actually worth watching as runs get longer is mechanical: more cable means more span to support, more exposure to wind movement, and more surface for UV over a twenty-five year life. Secure it properly and the electrical side takes care of itself.\u003c\/p\u003e\n\n\u003ch3\u003ePractical notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSupport at regular intervals rather than letting a long span hang between two points\u003c\/li\u003e\n  \u003cli\u003eKeep the pair running together to minimise loop area\u003c\/li\u003e\n  \u003cli\u003eWhere cable crosses a walkway or service path, route it above head height or beneath the structure — not across the ground where it will be stepped on\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in 1m, 2m and 4m.\u003c\/p\u003e","brand":"APsystems","offers":[{"title":"Default Title","offer_id":43465676849200,"sku":"APS-DCEXT-3M","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/DC_Extension_Cable_a4993e15-42f0-47a0-9382-4e1b0c0c9c90.jpg?v=1786088634"},{"product_id":"dc-extension-cable-mc4-4m","title":"DC Extension Cable MC4 — 4m","description":"\u003cp\u003eThe longest MC4 extension in the range at four metres — for the awkward installs where the module and its inverter ended up genuinely far apart.\u003c\/p\u003e\n\n\u003ch3\u003eWhen you need four metres\u003c\/h3\u003e\n\u003cp\u003eDetached arrays are the usual reason. A pair of modules on a shed roof feeding an inverter mounted on the wall below. A carport section wired back to equipment on the adjacent structure. A ground-mount row where the inverter had to sit at the accessible end rather than mid-row. In each case the distance is real and structural, not a mounting compromise you can design out.\u003c\/p\u003e\n\n\u003ch3\u003eThe point where you should stop extending\u003c\/h3\u003e\n\u003cp\u003eFour metres is near the sensible limit for a module-to-inverter DC run. If your layout needs substantially more than this, the answer is usually to move the inverter rather than to keep adding cable. Microinverters are designed to live at the array — that is the entire architecture. Long DC runs back to a distant inverter reintroduce exactly the problem module-level electronics exist to eliminate, and every extra metre is more cable exposed to weather, wildlife and mechanical wear for the life of the system.\u003c\/p\u003e\n\n\u003ch3\u003ePractical notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLong spans need proper support — plan the route and the fixings before you pull the cable\u003c\/li\u003e\n  \u003cli\u003eWhere the run leaves the array structure, protect it: conduit, cable tray, or routing beneath the frame\u003c\/li\u003e\n  \u003cli\u003eRodent damage to exposed PV cable is a genuine and frequently underestimated failure mode on ground mounts and outbuildings\u003c\/li\u003e\n  \u003cli\u003eKeep positive and negative together along the whole run\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso available in 1m, 2m and 3m. If you find yourself needing more than 4m, get in touch — there is usually a better layout.\u003c\/p\u003e","brand":"APsystems","offers":[{"title":"Default Title","offer_id":43465677635632,"sku":"APS-DCEXT-4M","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/DC_Extension_Cable_eb624276-db6b-49f4-8a60-954c751890a2.jpg?v=1786088660"},{"product_id":"portable-solar-panel-stand-legs","title":"Portable Solar Panel Stand Legs — Adjustable Ground Mount for Framed Panels","description":"\u003cp\u003eTurn any framed solar panel into a free-standing ground mount in a few minutes. The stand brackets bolt to the panel's aluminum frame using its existing grommet holes, then the adjustable aluminum legs fold out, extend and lock at the angle you want. When you're done, they fold flat against the panel for storage.\u003c\/p\u003e\u003cp\u003eThey are a natural match for the \u003ca href=\"\/products\/callsun-200w-n-type-bifacial-solar-panel\"\u003eCallsun 200W bifacial panels\u003c\/a\u003e: stand a pair up in the yard, wire them in series, and plug them into an \u003ca href=\"\/products\/apsystems-ez1-lv-plug-in-solar-kit-microinverter-apmeter-zero-export\"\u003eEZ1-LV microinverter\u003c\/a\u003e or a \u003ca href=\"\/collections\/portable-power-stations\"\u003eportable power station\u003c\/a\u003e. Lifting a bifacial panel off the ground also lets more reflected light reach its rear side.\u003c\/p\u003e\u003ch3\u003eWhich set do I need?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper legs:\u003c\/strong\u003e prop the top of the panel up while its bottom edge rests on the ground. One set per panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper + lower legs:\u003c\/strong\u003e raises the whole panel off the ground, clear of grass, dust, small shrubs and snow, with more airflow around it. One set per panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower legs only:\u003c\/strong\u003e add to panels that already have upper legs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGroup anchor add-on:\u003c\/strong\u003e extra anchor strap, grommet straps and anchor bolt, for anchoring every panel or starting a new row.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in each set\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eUpper set:\u003c\/strong\u003e 2 frame\/leg brackets, 2 two-section adjustable aluminum legs (48 in), 2 H-brackets with H-nuts, bolts, thumb nuts and hex nuts, 1 thumb bolt, plus an anchor strap, grommet strap and threaded anchor bolt. Each order also includes an anchor bolt socket, leg clamp Allen wrench and mini hex wrench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLower set:\u003c\/strong\u003e 2 frame\/leg brackets, 2 two-section adjustable aluminum legs (48 in), 2 lower leg clamps, bolts and nuts, 1 thumb bolt and 1 grommet strap.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits panels with a metal frame and grommet (mounting) holes; frameless and flexible panels won't work.\u003c\/li\u003e\n\u003cli\u003eAnchor panels that stay up for more than a day, since a raised panel catches wind.\u003c\/li\u003e\n\u003cli\u003eLegs adjust in height and angle so you can point the panel at the sun through the seasons.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot sure what fits your panels? \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e.\u003c\/p\u003e","brand":"InCharge Solar","offers":[{"title":"Upper + lower legs","offer_id":50627544645680,"sku":"ICS-STAND-SET","price":167.99,"currency_code":"USD","in_stock":true},{"title":"Upper legs only","offer_id":50627544678448,"sku":"ICS-STAND-UP","price":107.99,"currency_code":"USD","in_stock":true},{"title":"Lower legs only","offer_id":50627544711216,"sku":"ICS-STAND-LOW","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Group anchor add-on","offer_id":50627544743984,"sku":"ICS-STAND-ANC","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/Upper-and-Lower-Panel-Stand-Poles.jpg?v=1790632543"},{"product_id":"craftstrom-solar-panel-stand-set-of-2","title":"CraftStrom Solar Panel Stand — Set of 2","description":"\u003cp\u003eAdjustable steel stands for two CraftStrom 200W bifacial panels. Tilt the panels toward the sun in the yard or on a patio, or mount them upright on a balcony railing or fence.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 mounts (enough for 2 panels)\u003c\/li\u003e\n\u003cli\u003eGround stakes, bolts and nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFits the \u003ca href=\"\/products\/craftstrom-200w-bifacial-solar-panels-pair\"\u003eCraftStrom 200W bifacial panels\u003c\/a\u003e.\u003c\/p\u003e","brand":"CraftStrom","offers":[{"title":"Default Title","offer_id":50661289852976,"sku":"CS-STAND-2","price":398.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/cstromstudio-60-1-1.webp?v=1790829465"},{"product_id":"craftstrom-nec-smart-breaker","title":"CraftStrom NEC Smart Breaker — Plug-In Solar Safety Adapter, 2,000W","description":"\u003cp\u003eThe NEC Smart Breaker sits between your CraftStrom system and the outlet. It monitors voltage and current and disconnects the solar if the household circuit it's plugged into gets overloaded. CraftStrom recommends it whenever your system isn't on a dedicated solar circuit.\u003c\/p\u003e\u003ch3\u003eKey specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e up to 2,000W, 120V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e voltage and current detection with relay disconnect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize and weight:\u003c\/strong\u003e 4.8 × 4.3 × 3.7 in, 1.1 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ETL, CE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRunning two or more microinverters? A dedicated circuit is still the safest setup. \u003ca href=\"\/pages\/book-an-electrician\"\u003eHere's why it matters\u003c\/a\u003e.\u003c\/p\u003e","brand":"CraftStrom","offers":[{"title":"Default Title","offer_id":50661290704944,"sku":"CS-NEC-BREAKER","price":437.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/safety-gate-adapter-white-background.webp?v=1790829492"},{"product_id":"solar-panel-extension-cable-10awg-twin-wire-with-connectors","title":"Solar Panel Extension Cable – 10AWG Twin Wire with Connectors","description":"\u003cp\u003eExtend your solar panel setup with ease using this premium \u003cstrong\u003e10AWG (6mm²) twin wire solar extension cable\u003c\/strong\u003e. Each set includes one black and one red cable pre-terminated with solar connectors (male + female) on both ends for a plug-and-play connection between your solar panels and charge controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10AWG (6mm²) tinned copper conductor for minimal power loss\u003c\/li\u003e\n\u003cli\u003eRated for up to \u003cstrong\u003e30A \/ 1500V DC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIP67 waterproof connectors — resists dust, moisture, and corrosion\u003c\/li\u003e\n\u003cli\u003eUV-resistant thermoplastic elastomer (TPE) outer jacket — built for outdoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rated: -40°F to 194°F (-40°C to 90°C)\u003c\/li\u003e\n\u003cli\u003eCompatible with most solar panels and MPPT\/PWM charge controllers\u003c\/li\u003e\n\u003cli\u003eIncludes one pair: 1× red cable + 1× black cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Rooftop solar panels, RVs, boats, off-grid cabins, shop solar setups, and portable solar generators.\u003c\/p\u003e","brand":"InCharge Solar","offers":[{"title":"6 ft","offer_id":50740739506224,"sku":"GEO-SOLAR-EXT-6FT","price":29.99,"currency_code":"USD","in_stock":true},{"title":"10 ft","offer_id":50740739538992,"sku":"GEO-SOLAR-EXT-10FT","price":33.99,"currency_code":"USD","in_stock":true},{"title":"20 ft","offer_id":50740739571760,"sku":"GEO-SOLAR-EXT-20FT","price":49.99,"currency_code":"USD","in_stock":true},{"title":"30 ft","offer_id":50740739604528,"sku":"GEO-SOLAR-EXT-30FT","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/files\/716XUSqgt4L._SL1500.jpg?v=1791243918"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/3391\/6464\/collections\/product-accessories.jpg?v=1786089619","url":"https:\/\/www.inchargesolar.com\/collections\/cables-accessories\/craftstrom.oembed","provider":"InCharge Solar","version":"1.0","type":"link"}